Announcement

Collapse
No announcement yet.

Forum Top Advertisment

Collapse

LFX (GM V6) in a Miata @ Goodwin Racing

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • It would, indeed, be interesting to know; but, in my "can't wrench to save my life (or my car)" opinion, his intelligent approach, meticulous build, and "out of the ballpark" results really do supersede bean counting.
    Last edited by Loose Caboose; 11-22-2017, 10:47 PM.

    Comment


    • You guys are great. Thanks for the kind words. The past month has been huge, extremely happy to be racing the new recipe and getting great results so soon that confirm the vision is sound. There is even more in the works, I can't wait
      Ryan Passey
      Singulär Motorsports | Goodwin Racing

      #13 1990 Miata
      "The sport dedicating to the spirits of time attacking motoring" -Emilio

      Comment


      • And on that note!

        Chuckwalla Valley Raceway. New Miata lap records in both directions. CCW 1:51.9 / CW 1:51.4 (old records 1:56.7 and 1:56.4 respectively)



        Two day event at CVR, CCW Saturday then CW Sunday. Just a fun weekend getting laps in the car, getting more comfortable with it, etc. Kept data collection and adjustments light and just did lots and lots of laps. Fast laps in this thing requires a lot of trust in how fast it will go through sections. Car was happy to run all day long both days. Reminds me of tracking a naturally aspirated Miata just with the an entirely different performance envelope. Using leftover tires, had one set with over 20 heat cycles that I had already used at ACS, MRLS, and day 1 of SLB. Set 2 were fresher with just day 2 of SLB on them. Saturday's CCW time was on the old set. Switched to the fresher tires for the last session but never got clean laps, was doing 1:52's amidst traffic. CW was a little less drama on the fresher tires. It's a little ridiculous how fast the car is. Fastest car on track Saturday, 2nd fastest Sunday behind a GT1 class 911 Turbo on full slicks and the whole nine. Most cars in red group were doing ~6-12 seconds slower pace so clean laps were scarce because I'd almost always catch someone.

        Counter-clockwise:



        Clockwise:

        Ryan Passey
        Singulär Motorsports | Goodwin Racing

        #13 1990 Miata
        "The sport dedicating to the spirits of time attacking motoring" -Emilio

        Comment


        • More pics are surfacing from Superlap. A couple good ones from MotorWerks Magazine:



          Ryan Passey
          Singulär Motorsports | Goodwin Racing

          #13 1990 Miata
          "The sport dedicating to the spirits of time attacking motoring" -Emilio

          Comment


          • Flying out to PRI tomorrow morning. You can bet I'll be doing some research for Hyper while I'm there.

            The last two weeks or so have been refreshing, have been going home after work instead of spending long nights in the shop. It won't last though, dreaming up lots of improvements to get started on soon.

            Ryan Passey
            Singulär Motorsports | Goodwin Racing

            #13 1990 Miata
            "The sport dedicating to the spirits of time attacking motoring" -Emilio

            Comment


            • Cooking up a bunch of improvements, currently in crunch mode because I'd like to get the car out to Streets of Willow in just two weeks (!!). Will have updates for you guys when I get some time to sit down, but for now here are a few more great pics that surfaced from Superlap Battle, courtesy of Motolyric:







              Ryan Passey
              Singulär Motorsports | Goodwin Racing

              #13 1990 Miata
              "The sport dedicating to the spirits of time attacking motoring" -Emilio

              Comment


              • Ok time for some updates.

                2017 was a big success, and I'm really happy to have some solid baselines and results in the bag. Now, it's all about refinement and MORE in equal parts. In Decemeber with SLB fresh on my mind I did a fresh examination of the car and rulebook and identified anywhere I had room left on the table to maximize performance.

                Big on my list is to really hone the chassis and suspension to the maximum possible, within the Limited class rules of course. This goal encompasses both the systems on the car as well as the track-side setup and tuning. A car with all the potential in the world won't do much without putting in the testing and tuning hours to get everything working in unison.

                Enter 949 Racing. They need no introduction, these guys are good at a lot of things, but perhaps what they're the best at is setting up a car and extracting every bit out of it. That's not a small talent. Breaking new ground in an underdog chassis, I think a key to success is going to be in getting more out of the car than the competition, and there's a lot I can learn from these guys.

                With 949 on board comes a change to the suspension to extract everything possible allowed by the rules; GTA Limited allows 3-way shock adjustment. Ergo, XIDA triples:



                I quite like the look of the coaxial top mounts in the engine bay:



                Doing sub-1:50's at Buttonwillow has me looking for more roll resistance, even on the street tires. With the downforce I'm seeing race tire cornering loads, and scraping the outer sides of the aero on the track. There's no avoiding I need to go stiffer. The XIDAs come with another jump up in spring rate from my previous setup.

                The front sway bar also gets an update. It was one of the last things that's carried over in the build from pre-2017. At GWR we've been working with Karcepts, who make some really nice sway bars for the ND and a couple other chassis. I took some rough measurements and ran a few numbers and worked out that I just might be able to adapt some of the pieces of their ND sway bar to put together a 3 piece NASCAR style bar for this car. I ended up ordering a pair of their beautiful ND arms and their brackets/bushings for the S2000 because the measurements for those looked like they would work best, and a custom Speedway center tube:



                Many times in and out figuring out dimensions, checking full range of motion, etc. Had to make a pair of adapter brackets for the sway bar brackets.. here everything is about 90% sorted but I needed to move the endlink bracket on the control arm forwards to shift the pivot slightly. No problem there because those lower arms need to go anyways...



                In my factory lower arms I've been running an evaluation kit of press-in spherical bearings that replace all the bushings. Great concept, but unfortunately it turned out to not be the best execution in the product. Most people didn't know that in the final week before SLB I discovered a critical problem in the bearings in the rear lower arms so I ran SLB (and Chuckwalla after that) on factory rear lower arms with 100k mile factory rubber bushings - because it's what we had available at the last minute. Definitely not ideal. Time to get those arms out of the car and replace the front lowers as well to get the last of those bearings out and move on to something trouble-free.

                V8R tubular pro series arms arrived. These arrived in bare steel so I could do the custom endlink mount on the fronts:



                Then they went off to powdercoating to get finished up. Far more robust bearings in these, strong, awesome:



                Just about everything is installed and sorted out at this point, and I'd love to show some pics of everything installed buuuut can't really do that right now because this is the current state of affairs:



                Yep, two weeks to go before first track testing of the year, still cranking away on things feverishly
                Ryan Passey
                Singulär Motorsports | Goodwin Racing

                #13 1990 Miata
                "The sport dedicating to the spirits of time attacking motoring" -Emilio

                Comment


                • Makes me tired just reading about it!

                  Hats off to your commitment to this project. As they say, the last 10% takes longer than the first 90% and most people never push through to the end.

                  Comment


                  • Originally posted by craZee View Post
                    Makes me tired just reading about it!

                    Hats off to your commitment to this project. As they say, the last 10% takes longer than the first 90% and most people never push through to the end.
                    There is no end

                    (And thanks!)
                    Ryan Passey
                    Singulär Motorsports | Goodwin Racing

                    #13 1990 Miata
                    "The sport dedicating to the spirits of time attacking motoring" -Emilio

                    Comment


                    • I constantly get asked when I am going to be "done" with a car build. My reply is "when I sell it" LOL

                      Comment


                      • Originally posted by craZee View Post
                        I constantly get asked when I am going to be "done" with a car build. My reply is "when I sell it" LOL
                        lol. That should be in your sig panel.
                        WWW.949RACING.COM
                        SuperMiata

                        Aside from their cost I never understood why people race them.
                        But obviously I just dont get it. -fatbillybob

                        Comment


                        • At some point it ain't a Miata no more! Reminds me of avoiding the taxes in a major home re-do. No sir, it's not new - see that stud over there in the corner? That's original! This is a re-model!

                          Comment


                          • Last weekend, with two weeks to go before the first track testing of this season, I was debating whether I should swap in transmission #2. From my post back in January, when trans #2 arrived I was able to confirm that the shifter rod was supposed to pivot - and that the pivot on trans #1 in the car was seized. That's been the cause of my clunky/stiff shifter feel, which is one of two transmission issues I've been dealing with. Issue #2 has been with clutch disengagement, and this one everyone has noticed because you can hear the gear grinding in my videos. Having checked out everything outside of the transmission, we feel confident the issue must be in the relationship between the throwout bearing and the clutch. Can't know for sure without getting in there. January was stuffed full with getting all of the updates/changes in the suspension and brakes on the car because so I can start out early season testing with all of that in place, so this is the earliest I've had a chance to turn attention to the transmission.

                            I already had measurements for the transmission side of things from trans #2 sitting on the bench. I even bought an MV5 (Camaro version of the transmission) to take the same measurements and confirm first-hand there weren't any differences between the two variants (I'm using the Cadillac MV7):



                            To get the full picture, we also needed to measure the clutch and flywheel. Based on the nature of the clutch disengagement problems, we expected that when we got in there we would find the throwout bearing is too far from the clutch fingers, and that would be an easy fix - you just shim the slave/TOB assembly to the correct position. On Sunday I dropped the engine/subframe/trans:



                            I expected I'd pull a long day and have everything back in the car by night with the TOB shimmed to the correct location. With everything out, I measured the clutch and flywheel height, and that threw a wrench in the plans. The TOB wasn't too far from the clutch, it was too close, and by a massive amount. With the trans bolted to the engine and everything at rest, the TOB would already be compressing the clutch fingers by 0.200" (and the fingers only have an intended range of motion of about 0.400"). So the problem is the opposite from expected; I'm over-stroking the clutch.

                            Left everything on the ground and called SPEC Monday morning. Based on their notes, the stack height from flywheel/crankshaft surface to clutch fingers for their clutch/flywheel assembly should be 3.800" +/- .005". Mine is 4.1"

                            With the window of time to get everything back together quickly shrinking (The car still needs to visit the alignment shop and the dyno prior to the track) I overnighted the clutch and flywheel back to SPEC. They're working on it now, no word yet but it would appear they manufactured the flywheel with the wrong thickness.
                            Ryan Passey
                            Singulär Motorsports | Goodwin Racing

                            #13 1990 Miata
                            "The sport dedicating to the spirits of time attacking motoring" -Emilio

                            Comment


                            • The good news is that you should save some weight on that flywheel!
                              Such an amaizing build once again, can't wait to see the results on track!

                              Ben

                              Comment


                              • Corrected items arrived back from SPEC yesterday. They say it was a machining error inside the pressure plate that affected the pivot. As soon as it arrived I measured things to verify, finger height from crank surface is now 3.85x" which leaves the TOB about 0.030" of a gap from full compression. We're in the ballpark now.

                                Reattached engine and trans last night. Should have the engine back in the car today, at which point I'll be back on-track where I was a week ago, but now with one week to do two weeks of stuff. Still holding my breath, I won't declare the transmission issues fixed until I've actually driven it on the track, but if they are then it was all worth it.
                                Ryan Passey
                                Singulär Motorsports | Goodwin Racing

                                #13 1990 Miata
                                "The sport dedicating to the spirits of time attacking motoring" -Emilio

                                Comment

                                Working...
                                X